10 Pack Brother Compatible TZe-231 / TZ-231 Label Tape – Black on White 12mm x 8m P-Touch

Each TZe-231 cassette is approximately 12 mm (0.47 in) wide and contains 8 m (26.2 ft) of laminated tape.

TZe-series tapes (including TZe-231 / TZ-231) are designed for use in Brother P-Touch-type label makers that accept TZe/TZ cartridges. If you’re unsure whether your exact model uses TZe/TZ cartridges, check your device’s tape compatibility list or the device manual before purchase.

Yes. TZe laminated tapes are abrasion-, water- and chemical-resistant and are suitable for many indoor and outdoor labeling tasks where exposure to moisture, cleaners or sunlight is possible. They hold up well on smooth surfaces and in environments that require periodic cleaning.

The listing is for a compatible (third-party) 10-pack of TZe-231-style tapes. Genuine Brother tapes are sold by Brother and authorised retailers; compatible tapes are manufactured by third parties and can offer the same dimensions and similar characteristics but are not Brother-branded. If you prefer manufacturer-guaranteed performance, choose Brother-genuine supplies.

That depends on the length of each label you design. Each cassette contains 8 metres of printable tape—so dividing 8,000 mm by your average label length (in mm) gives an approximate label count. For example, 100 mm average labels would yield roughly 80 labels per cassette. Use this approach to estimate yield across the 10-pack.

TZe laminated tapes use a permanent adhesive intended for long-lasting labels on smooth surfaces. In many typical uses they remove cleanly, but on some surfaces (textured plastics, painted surfaces, or surfaces exposed to heat/UV for long periods) adhesive residue can remain. If residue is a concern, test a short label in an inconspicuous area first or use a lower-tack tape type. The technical data for TZe-type tapes covers adhesive behavior in more detail.

Installation is straightforward: open the tape compartment on your P-Touch, place the cassette so the tape feeds correctly across the print head, close the cover and follow your label maker’s prompts. Many tapes use a “crack-and-peel” backing feature so you can peel labels easily after printing.

Yes. Your Brother P-Touch lets you select label length, fonts and sizes (within the printer’s supported range) so you can print short edge labels, long wrap-around labels or multi-line labels as required. The tape is then cut to the length you specify.

Yes. The TZe/TZ family includes many colour and finish combinations (black on white, black on clear, black on yellow, silver, matte metallics, fabric tapes, etc.). TZe-231 specifically is Black print on a white background. If you need contrast or a particular finish, there are other TZe options to consider.

Store unopened cassettes in a cool, dry place away from direct sunlight. TZe-type laminated tapes are stable for long periods if stored properly; consult the manufacturer or the technical data sheet for exact shelf-life figures and recommended temperature ranges (technical sheets give thickness and storage guidance).